Moana Costume Tutorial Part 4: Reassembling the Skirt

Moana Costume Tutorial Part 4: Reassembling the Skirt

With the belt done, it was time to reassemble the skirt. I took the belt and laid it over the skirt back, making sure to line up the back and front belts so that the sides matched.

moana costume skirt tutorialI stitched down the belt along the side seams.

moana costume skirt tutorial

I pinned the skirt back to the skirt front, right sides together, stitched the side seams…

moana costume skirt tutorial

And flipped the skirt right side out.

moana costume skirt tutorial

The other modification I wanted to do was to  replace the grass skirt on the skirt liner. I cut off the fringe, and hemmed the bottom edge.

moana costume skirt tutorial

I bought a polyester synthetic grass table skirt and pulled off the flowers. I tried with a real grass skirt initially, but I found the grass was way too stiff, and looked pretty bad when I trimmed it down to kid sizes.

I pinned the grass to the wrong side of the liner, and stitched it down. I placed it a couple inches below the top edge, so as not to have too much bulk at the waistline. I ended up doing 2 layers of grass because 1 layer looked a little sparse.

Once the grass skirt was attached, I pinned the liner to the skirt, right sides together.

moana costume skirt tutorial

I stitched along the top seam, and then flipped the skirt so the right sides were facing out. I ironed the top edge flat, and then top stitched along it to hold it in place. I took the the elastic that I removed when I took apart the skirt,  stretched it out across the back of the skirt, and sewed it back in.

moana costume skirt tutorial

The final step was to put the skirt on my dummy and trim the grass skirt so that it was a couple inches below the skirt bottom edge. My dummy is the Ikea kids clothing stand stuffed with polyfil. If you don’t have a dummy, you can clip the skirt to the bottom rung of a hanger, or tape the skirt to a table edge. You just need the bottom edge to be level so you can trim it.

Optional step: There are the tacking stitches in the skirt front that keep the 2 front panels from falling open. I removed them because now that I have a full length grass skit underneath, it doesn’t matter how wide the skirt gap is.

And that was how I made the Grub’s Moana costume!

 

Moana costume tutorials:

 

Moana Costume Tutorial Part 4: Reassembling the Skirt was originally published on Confused Kitty Sewing

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s